阅读说明：本技术 空气发电装置 (Air power generation device ) 是由 曹起龙 于 2018-03-08 设计创作，主要内容包括：空气发电装置是根据空气动力学的原理,设置局部小环境空气超强流动技术,推动若干螺旋形风叶旋转,按1∶10凸凹形皮带盘连结内凸凹形皮带,即螺旋风叶5转/秒,发电机飞转50转,一分钟3000转,此刻发电机就正常发电。如图1。两个摩天轮盘,每个轮盘内外两侧幅条,是由能转动的螺旋形风叶构成,风叶皮带盘和发电机皮带盘相连,均由风叶轴承和装满润滑油轴承盒连接固定成整体。通过电瓶电能,将两大轮盘中间电机启动,轮盘内外两侧各18个发电体风叶,总计12V×72个发电体,共发电864伏,除去264电量供应启动电瓶充电,还保证电机正常运转,必须有600伏毛电输出,供用户常久使用,确保电价向零收费迈进。(The air power generation device is characterized in that a local small environment air super-strong flow technology is arranged according to the principle of aerodynamics, a plurality of spiral blades are pushed to rotate, the convex-concave belt discs are connected with the inner convex-concave belts according to the ratio of 1: 10, namely 5 revolutions per second of the spiral blades, 50 revolutions of the generator are flown, 3000 revolutions are carried out in one minute, and the generator generates electricity normally. As in fig. 1. The two ferris wheel discs are provided with spokes at the inner side and the outer side of each wheel disc, each spoke is composed of a rotatable spiral fan blade, the fan blade belt discs are connected with the generator belt discs, and the fan blade belt discs and the generator belt discs are connected and fixed into a whole by fan blade bearings and bearing boxes filled with lubricating oil. The middle motor of the two large wheel discs is started through the electric energy of the storage battery, the 18 fan blades of the power generators on the inner side and the outer side of the wheel discs respectively account for 12V multiplied by 72 power generators, the total power generation is 864V, 264 electric quantity is removed to supply the starting storage battery for charging, the normal operation of the motor is also ensured, 600V crude electricity output is required, the power is supplied to a user for a long time, and the electricity price is ensured to advance to zero charge.)

1. According to the application, local environment type super strong wind power is arranged to push the spiral fan blade to rotate according to the aerodynamic principle, and a 12V or 24V … … generator is driven according to the power transmission principle of a belt pulley of 1: 10. Namely, the spiral fan blade rotates at 5 revolutions per second, and the generator rotates at 50 revolutions; 3000 revolutions of the generator per minute, namely, normal power generation. This is the power generation principle of 1 wind turbine.

2. The wind turbine generator with the spiral blades is characterized in that the wind turbine generator is a spiral blade, an upper bearing, a lower bearing and a bearing cover, and a generator and a support thereof are fixed on an upper circle and a lower inner circle of a large disc to form a generator set, as shown in fig. 5.

3. A plurality of wind turbine generators. As shown in figures 1 and 2 in the application, 18 wind turbine generators are respectively arranged on the inner side and the outer side of each of the two large wheel discs and are connected and rotated through middle shafts at two ends of a motor in the middle of the two large wheel discs. When the rotating speed of each group of generators reaches 3000 revolutions, the generators generate electricity at the same time. 72 gensets, producing a total normal power of 864 volts.

4. When 72 wind turbines generate 864v normal power, the 264 v power is not only used to ensure the motor power and charge the battery for starting the motor power, but the remaining 600v power is used to illuminate and use the user by the power distribution room and the cable pole according to fig. 4.

The technical field is as follows:

the technology belongs to the field of energy conservation and environmental protection. The air as inorganic energy source is used as power medium for large-scale power generation by human beings.

Air is the inorganic energy source, and is the richest, cheapest, cleanest and safest inorganic energy source on the earth.

The technology is based on the principle of simple and basic mechanical device, and the spiral fan blade and the small micro generator set are used to generate super strong wind power in a local small environment to push the spiral fan blade to drive the small micro generator set to fly at high speed, so as to generate electricity at 3000 rpm.

The power generation of each small micro generator set is 12 volts, the power generation of 72 generator sets is 864 volts, the output electric energy can reach 600 volts, and the long-term free power utilization of three or two families can be met.

If the ferris wheel type large-scale generator set is adopted, the generating capacity can reach tens of thousands of volts and hundreds of thousands of volts. If a plurality of units form a power station, various thermal power generation, wind power generation and nuclear power generation can be replaced.

Background art:

the technology adopts a lever principle for creative application in the application of actual production and life, and has the main purpose of creatively exerting the principle of Newton's continuous power assistance by fully utilizing a simple mechanical device and achieving the purpose of producing several times, dozens of times and hundreds of times of energy (electric energy) by combining very small energy (electric energy) with the principle of gravitational inertia power assistance.

The application strictly adheres to the basic principles of aerodynamics and hydrodynamics, and takes air as a medium of a power source.

For example, a jack can jack ten thousand jin and ten thousand jin, and only needs a small force.

In addition, in actual life, if people slide on the cement ground in the ice, snow and ice, the pulleys of the skates drive the human body to quickly slide on the flat ground and downhill only by inclining the human body forward by a certain angle.

Workers and masters can safely and nondestructively move and move various large pieces, large tobacco pipes with the height of one hundred meters and the weight of one thousand tons and commemorative large buildings by a plurality of jacks and rollers.

In water, fishes freely swim and rapidly pass through the water by virtue of own scales and mucus which is not stained with water, and almost no resistance and friction force exist.

From the above facts and the theoretical technical background, it is verified that a power group in the same direction, an infinite number of power groups, can sufficiently satisfy the "air power generation device", and can completely pass through the power group, which is verified in theory or actual life.

Since this technology is fully capable of passing through in theory and real life. The spiral-vane generator set is arranged into an integrated block like an abacus, is placed on the surface layer of the airplane and the surface layer of the space capsule like a roller, a roller and scales in fish water and is not stained with water and liquid, not only does the airplane and the space capsule have no resistance and friction in the atmosphere, but also the resistance and the friction are instantly converted into strong electric power to drive an air pump and an air storage tank to form the function of air flow recoil, thereby ensuring the safe taking off and landing of the airplane and the safe soft landing of the space capsule and avoiding the high temperature and the burning of the space capsule.

If the abacus type power generation integrated block is arranged on a high-speed rail and a motor car, the high-speed rail and the motor car are free from hanging wires and rapid flying of cables.

The technical content is as follows:

the technology is designed with micro, small, medium, large and super large generating devices at all levels, can meet the requirements of society in various aspects, and has extremely low cost.

If the technical device is arranged on various ships and aircraft carriers according to grades, a powerful power supply can replace power generated by various fuel oil, gas and coal, and the nuclear aircraft carrier power can also be replaced if the power is available.

If the power generation device of the technology is arranged into an integrated block like an abacus as shown in a core technology figure 5 and is arranged on the periphery outside an aircraft cabin, the upper part and the lower part of the aircraft wing can be used for both oil and electricity and can be used for electricity independently. The device is silent and noiseless and is not limited by time and flight radius.

The technical device is arranged on an airplane, a ship and an aircraft carrier to generate electricity as desired, so that a strong mobile power supply is formed, and the power requirements of various laser firearms can be fully met.

Description of the drawings:

FIG. 1 (Whole picture)

1. Wheel system 2, automatic regulating motor system with certain power

3. Power distribution system 4, pole and transmission of electricity lighting system

5. Support motor support 6, business turn over power cable system

7. Power output cable

FIG. 2 (wheel system)

1. Spiral type fan blade 2, 12V generator

3. Fan-shaped 2/3 inner ring 4 and wheel disc axle center

5. Wheel disc outer ring 6 and bearing box

7. Lead slip ring for supporting six columns 8 and A, B, C of wheel disc

FIG. 3 (constant power automatic speed regulating motor system)

1. Motor body 2 and hanging ring

3. Motor shaft 4 and connecting electric bracket footing

FIG. 4 (distribution room and electric pole transmission lighting system)

1. Electric pole 2 and lighting lamp

3. High-voltage line 4 and low-voltage line

5. Business turn over power cable 6, join in marriage electrical room

FIG. 5 (spiral blade generator set structure diagram)

1. Spiral fan blade 2 and scroll shaft

3. Bearing 4, big belt pulley 1: 10

5. Small belt pulley 1: 106, 12V generator

7. Generator middle shaft 8, inner convex belt

9. Large bearing cover (solid generator support) 10 and generator support

11. Lower bearing cap

The method comprises the following specific implementation steps:

the present technique now explains the implementation for 12V × 72 generator sets. Now, explanation will be given with respect to fig. 5 mounted on a wheel: when the large wheel disc of fig. 1 is started up by the motor, the large wheel disc on the connecting shaft normally rotates, all 72 spiral blades in fig. 5 of the core power generator in the technology rotate to drive 72 12V power generators, the power generators are connected according to a belt pulley of 1: 10, the power generators fly up to 3000 revolutions per minute, each unit generates 12V power, and 72 units are 864V power.

The process is that when three groups of coils in the generator normally generate electricity, one pile head of each group of coils is arranged outside the generator body and respectively comprises an A pile head, a B pile head and a C pile head, the electricity generated by each pile head is 4V, the sum of A + B + C is 12V, and the total electricity generation amount is 864V.

However, the stub of each coil, for example, the stub of group a, is connected in parallel with the stub of 72 generators a, i.e., 288V. The pile head B and the pile head C are the same as the pile head A.

In fig. 2, the pile head a is connected with the copper slip ring a, the pile head B is connected with the copper slip ring B, the pile head C is connected with the copper slip ring C, and the pile head and the slip ring are naturally connected through a wire with a certain diameter.

When the motor is close to the inner sides of the two large wheel discs, A, B, C carbon brushes with elasticity are respectively used for closely sticking with A, B, C three copper slip rings on the inner sides of the two large wheel discs, and each group of 288V electrified cables are respectively sent into a power distribution room for matching and voltage boosting and reducing measures.

Through the voltage reduction measure, one part of the voltage is reduced to 220V or 380V alternating current to supply long-term power to the started motor, and the other part of the voltage is converted into low-voltage direct current through voltage transformation and rectification to charge the starting storage battery, so that the storage battery is ensured to have full and sufficient electric energy for a long time.

The output crude electricity of the power distribution room after the voltage boosting and reducing treatment is nearly 600V, and the power distribution room can be used for high-voltage long-distance transmission, low-voltage illumination and other applications.

If the two large wheel discs are calculated at 360 degrees, one set of spiral fan blades at every 2 degrees is used as a set, the generator sets are respectively arranged at the inner side and the outer side of the two large wheel discs,

the total number of the 720 groups is 8640V, and if the number of the generator groups is 24V, the total power generation amount is 17280V.

Note that:

each generator is a precise product, and is required to be tight and firm except being installed on a large wheel disc, and is required to be constantly detected and checked to prevent parts from being worn and damaged, and lubricating oil is required to be filled in time.

More importantly, to prevent rainwater from invading the generator set, attention must be paid to the safety and facilities of the power distribution room all the time to ensure the long-term safe power utilization of users.

The technology is expected to look ahead:

1. inorganic energy replaces organic energy, and dominates the future energy world.

2. In future, the aircraft, the ship and the aircraft carrier can be used for both oil and electricity or only for electricity.

3. Organic energy sources such as petroleum, coal, natural gas, etc. are being replaced by construction or heavy materials are being converted to light construction materials. The total weight of the skyscraper and the weight of the bridge are greatly reduced.