阅读说明：本技术 一种用于围栏养殖的合成纤维网连接装置 (Synthetic fiber net connecting device for fence cultivation ) 是由 王磊 王鲁民 宋炜 石建高 王帅杰 徐国栋 于 2020-04-21 设计创作，主要内容包括：一种用于围栏养殖的合成纤维网连接装置,合成纤维网按照围栏养殖设施柱桩建造的间距制成相应尺寸的网片,边缘固定好受力绳纲；将连接扣与连接件组合好,利用轴承穿插连接形成组合连接件,使连接扣保持打开状态；将绳纲对应放入组合连接件的子母连接扣内部,并闭合子母连接扣,使卡齿进入卡槽,制成标准的合成纤维网模块；根据强度设计要求设定网衣与柱桩的连接点,以此设定柱桩预装件在柱桩的安装间距,并预固定于柱桩上；将合成纤维网模块与柱桩预装件的安装孔对齐后通过尼龙棒穿插固定,再锁紧柱桩预装件的螺栓,即可在两根柱桩间完成网衣的安装。(A synthetic fiber net connecting device for fence cultivation is characterized in that synthetic fiber nets are manufactured into net pieces with corresponding sizes according to intervals built by column piles of fence cultivation facilities, and stress ropes are fixed on the edges of the net pieces; combining the connecting buckle and the connecting piece, and utilizing the bearing to penetrate and connect to form a combined connecting piece so as to keep the connecting buckle in an open state; correspondingly placing the lacing wires into the primary and secondary connecting buckles of the combined connecting piece, closing the primary and secondary connecting buckles, and enabling the clamping teeth to enter the clamping grooves to manufacture a standard synthetic fiber net module; setting connection points of the netting and the column piles according to strength design requirements, so as to set the installation distance of the column pile pre-assembly on the column piles, and pre-fixing the column pile pre-assembly on the column piles; after aligning the synthetic fiber net module with the mounting hole of the column pile pre-assembly, inserting and fixing the synthetic fiber net module through a nylon rod, and then locking the bolt of the column pile pre-assembly, so that the installation of the netting can be completed between the two column piles.)

1. A synthetic fibre web connection device for pen farming, comprising a post (1) and a fibre web (6), the post (1) being surrounded by a post package (9); the outer side of the pile pre-assembly (9) is fixedly or welded with a pre-assembly connecting device (8); the package connecting device (8) has a package connecting opening (25) in the vertical direction; the edge of the fiber net (6) in the vertical direction is fixed with a rope (4); the rope line (4) is locked in the connecting buckle (5) and is connected with the connecting buckle (5); the connecting buckle (5) and the connecting piece (7) after the rope (4) is connected are connected through the penetrating bearing (3) to form a synthetic fiber net module; the connecting piece (7) and the pre-assembly connecting device (8) are connected through a nylon rod (2) or a bearing in the vertical direction.

2. The device according to claim 1, characterized in that the connector link (5) is circular and comprises a semi-circular male connector link (12) and a female connector link (13), wherein one end of the male and female connector links are engaged with each other through a protrusion and a notch, and the other corresponding end is openable and closable through a latch and a slot.

3. The device of claim 2, wherein the female connector link (13) has a female connector link collar (19) and a female connector link recess (23) at one end, the male connector link (12) has a male connector link recess (20) and a female connector link collar (21) at one end, the female connector link recess (20) is embedded in the female connector link collar (19), the female connector link recess (23) is embedded in the female connector link collar (21), the female connector link opening (16) is formed in the female connector link collar (19), and the male connector link opening (22) is formed in the male connector link collar (21).

4. The device according to claim 2, wherein the head of the secondary connector link (12) has a structure of a barb type with a latch (17), the corresponding head of the primary connector link (13) has a slot (18) corresponding to the latch (17), and the head of the primary connector link (13) has a lip (24) which is a rounded structure to facilitate the cutting of the latch (17) into the inner side of the primary connector link (13) when closed.

5. The device according to claim 1, characterized in that the stud pre-assembly (9) is a circular ring structure surrounding the periphery of the stud, the end of the circular ring structure is bent to form a butt plate (10) or to mount the butt plate (10), the butt plate (10) is perpendicular to the circular ring, the butt plate (10) is provided with two butt plate openings (26), and the two butt plate openings (26) are fixedly connected by bolts (11).

6. Device according to claim 5, characterized in that the package attachment means (8) is welded to the outside of the post package (9), the package attachment means (8) being ring-shaped or lug-shaped with an open package attachment opening (25).

7. The device according to claim 1, characterized in that the connecting piece (7) is a profiled bar structure, not limited to a drop shape and an oval shape, the two ends of the connecting piece in the horizontal direction are respectively provided with an opening, the large opening (14) of the connecting piece is aligned with the small opening (15) of the connecting piece, wherein the large opening (14) of the connecting piece is aligned with the connecting opening (25) of the pre-assembly on the pre-assembly connection (8), and the nylon rod (2) is inserted for connection.

8. The device according to claim 7, characterized in that the connector apertures (15) are aligned with the combination of the female connector openings (16) and the male connector openings (22) for the bearings (3) to be connected in series.

9. Device according to claim 1, characterized in that the connector links (5) are arranged alternately with the connectors (7), the connectors (7) being arranged alternately with the package connecting means (8).

10. Use of the synthetic fiber net connecting device for pen farming of claim 1 in pen farming.

Technical Field

The invention relates to a connecting technology of a synthetic fiber net and a column pile on a fence culture facility, which is used for quickly connecting the synthetic fiber net to the column pile.

Background

The fence culture facility is supported by using reinforced concrete piles or steel pipe piles as fixing piles, a purse net body consists of a copper alloy netting and a synthetic fiber netting, the copper alloy netting is generally adopted at the part below the low tide level of seawater in the design of the net body, the water flow is kept smooth by utilizing the characteristic of preventing marine fouling organisms from attaching, and the part of the net body above the water surface of the low tide level cannot be subjected to the condition of no damage to the attachment of the organisms, so that the expensive copper alloy netting is not required to be adopted, the synthetic fiber netting is adopted to construct the upper half part of the fence culture facility net body, and the function of the fence culture facility is to prevent fishes inside the fence culture facility from escaping during the flood tide or under the wave condition. In the construction technology of the net body, the synthetic fiber net has the characteristic of easy aging, and a new net needs to be replaced every 2 to 3 years so as to ensure the integral strength of the net body. The prior art adopts synthetic fiber net to stick to the post and adopts the rope to tie up fixedly, produces stress concentration problem when the atress, concentrates the atress of whole piece netting on limited several tie point, causes tearing of netting easily, simultaneously because the soft characteristic of synthetic fiber net, the netting can not obtain fine opening, influences the stability and the security of the whole dictyosome of fence culture facility, in addition, the tie point of synthetic fiber netting and post is direct contact, also can produce the friction between netting and the post, the decay of the net intensity is accelerated.

Disclosure of Invention

The invention aims to design a connecting device of a synthetic fiber net and a column pile, which can conveniently and quickly connect the synthetic fiber net to the column pile, simultaneously ensure the uniform connection stress of a synthetic fiber net and improve the safety of a net body structure of a fence cultivation facility.

In order to achieve the purpose, the invention provides the following technical scheme: a device for connecting a synthetic fiber net and a pile comprises the pile and the fiber net, wherein a pile pre-assembly is surrounded on the pile; the outer side of the column pile pre-assembly is fixed or welded with a pre-assembly connecting device;

the package connecting device has a package connecting opening in a vertical direction;

the edge of the fiber net in the vertical direction is fixed with a rope;

the rope line is locked in the connecting buckle and connected with the connecting buckle;

the connecting buckles and the connecting pieces after the rope lines are connected through the penetrating bearings to form a synthetic fiber net module;

the connecting piece and the pre-assembly connecting device are connected in the vertical direction through a nylon rod or a bearing.

The connector link is circular comprises semicircular son connector link and female connector link, wherein the mutual gomphosis of boss and notch is passed through to the one end of son and mother connector link, and the other end that corresponds can open and be closed through latch and draw-in groove.

Female connector link's one end has female connector link bulge loop and female connector link notch, son connector link one end has son connector link notch and son connector link bulge loop, and son connector link notch embedding female connector link bulge loop, the son connector link notch embedding son connector link bulge loop, female connector link trompil setting are at female connector link bulge loop, and son connector link trompil is located son connector link bulge loop.

The head of son connector link has latch barb type structure, the head that female connector link corresponds has the draw-in groove that corresponds with the latch, and the head of female connector link has the mouth reason, for the radius angle structure, and the inboard of female connector link is cut into to the latch when convenient the closure.

The post stake subassembly is the ring form structure, encircles the post stake periphery, the end of ring form structure forms the butt joint board or installs the butt joint board through buckling, and butt joint board and ring are perpendicular, and two butt joint board trompils are opened to the butt joint board, and the trompil on two butt joint boards passes through bolt fixed connection.

The pre-assembly connecting device is welded on the outer side of the post pre-assembly, and is in a ring shape or a lug shape and is provided with a hole pre-assembly connecting hole.

The connecting piece is the profile shapes structure, is not limited to water droplet shape, oval, and the both ends of connecting piece horizontal direction have respectively to have an trompil, and the big trompil of connecting piece aligns with the little trompil of connecting piece, and the trompil is connected to the pre-assembly on wherein the big trompil of connecting piece is connected with the pre-assembly, alternates the nylon stick and realizes connecting.

And the small opening of the connecting piece is combined and aligned with the opening of the female connecting buckle and the opening of the male connecting buckle and then connected with the bearing in series.

The connecting buckles and the connecting pieces are arranged alternately, and the connecting pieces and the pre-assembly connecting devices are arranged alternately.

The design innovation of the invention is that the edges of the synthetic fiber net are pre-connected with the combined connecting piece, and the flexible synthetic fiber net is made into a standard net piece module by using the integral rigid support of the combined connecting piece, thereby completing the standardized batch production in a factory; based on the requirement of connection strength, the column-pile packages are arranged and pre-fixed at intervals preliminarily set on the column piles, the connecting piece open holes of the synthetic fiber net module are aligned with the package connecting open holes on the column-pile packages during marine installation, and nylon rods are used for inserting and fixing, so that the installation is convenient; the friction effect caused by the direct contact of the synthetic fiber net and the pile is avoided; the connecting points are closely and uniformly distributed, and have certain rotatability, so that the tearing of the netting caused by the single-point stress of the synthetic fiber net can be avoided; after the column pile pre-assembly is arranged on the column pile at a preset interval and pre-fixed, when the column pile pre-assembly is aligned with the synthetic fiber net module, the tightness can be controlled by adjusting the position of a pre-assembly butt joint plate, and the position can be properly adjusted so as to be better butted with the synthetic fiber net module; the synthetic fiber net is modularly installed between two column piles to form a netting unit, so that even if the net is damaged under the impact of sea waves or floaters, the net can be quickly replaced, and the difficulty and material waste caused by replacement after the whole large-area synthetic fiber net is damaged as a netting are reduced.

Drawings

FIG. 1 is a schematic view of a fiber web and pile connection

FIG. 2 enlarged view of the connection of the net piles

FIG. 3 is a schematic view of the combination of a connecting buckle and a connecting member

FIG. 4 shows a structure of a connector

FIG. 5 is a schematic view of a connection buckle in a half-open state

FIG. 6 is a schematic view of the connecting buckle

Fig. 7 a schematic view of a post package

FIG. 8 stud subassembly installation schematic

Detailed Description

The technical solutions in the embodiments of the present invention will be clearly and completely described below with reference to the drawings in the embodiments of the present invention, and it is obvious that the described embodiments are only a part of the embodiments of the present invention, and not all embodiments, and all other embodiments obtained by a person of ordinary skill in the art without creative efforts based on the embodiments of the present invention belong to the protection scope of the present invention.

Referring to fig. 1-8, 1, a synthetic fiber net connecting device for fence cultivation is characterized by comprising a post 1 and a fiber net 6, wherein a post pre-assembly 9 is arranged on the post 1; the outer side of the pile pre-assembly 9 is fixed or welded with a pre-assembly connecting device 8; the package connecting means 8 has a package connecting opening 25 in the vertical direction; the edge of the fiber net 6 in the vertical direction is fixed with a rope 4; the rope 4 is locked in the connecting buckle 5 and connected with the connecting buckle 5; the connecting buckle 5 and the connecting piece 7 after the rope 4 is connected are connected through the penetrating bearing 3 to form a synthetic fiber net module; the connection piece 7 and the package connection means 8 are connected in the vertical direction by means of a nylon rod 2 or a bearing.

This application stake 1 mainly is steel-pipe pile or concrete pile, and the stake specification that this scheme explains adopted is 1000 mm's of outside diameter steel-pipe pile, and the surface is through anticorrosive treatment, anticorrosive coating thickness 3 mm.

The nylon rod 2 of the present application is formed of a nylon rod material having a diameter of 28mm, and is connected in series by aligning the connector opening 14 with the package connection opening 25.

The rope 4 of the present application is a polyethylene rope or a nylon rope, the diameter of the rope is 14mm, and as the edge lacing line of the fiber net 6, resin can be coated to enhance the wear resistance.

The fiber net 6, synthetic fiber netting, netting material mesh size of this application is unilateral length 30 mm.

The utility model provides a bearing 3 is stainless steel material, and the specification is diameter 8mm, through the little trompil 15 of series connection spare, female connector link trompil 16, son connector link trompil 22, with connecting piece 7, son connector link 12 and female connector link 13 to 1 with connecting piece 7, 1 son connector link 12 and 1 female connector link 13 be a unit combination of arranging, form built-up connection spare, the length decision of the quantity of unit according to the rope line.

The connecting buckle 5 is circular and comprises a semicircular sub-connecting buckle 12 and a semicircular female connecting buckle 13, wherein one end of the sub-connecting buckle is embedded with a notch through a boss, and the other end of the sub-connecting buckle can be opened and closed through a latch and a clamping groove.

Female connector link 13's one end has female connector link bulge loop 19 and female connector link notch 23, son connector link 12 one end has son connector link notch 20 and son connector link bulge loop 21, and son connector link notch 20 embedding female connector link bulge loop 19, and female connector link notch 23 embedding son connector link bulge loop 21, female connector link trompil 16 sets up at female connector link bulge loop 19, and son connector link trompil 22 is located son connector link bulge loop 21.

The head of son connector link 12 has latch 17 barb type structure, the head that female connector link 13 corresponds has the draw-in groove 18 that corresponds with latch 17, and the head of female connector link 13 has a mouth edge 24, for the radius angle structure, and latch 17 cuts into the inboard of female connector link 13 when convenient closed.

The stud pre-assembly 9 is of a circular ring-shaped structure, surrounds the periphery of the stud, the tail end of the circular ring-shaped structure is bent to form a butt joint plate 10 or install the butt joint plate 10, the butt joint plate 10 is perpendicular to the circular ring, two butt joint plate holes 26 are formed in the butt joint plate 10, and the holes 26 in the two butt joint plates are fixedly connected through bolts 11.

The docking plate opening 26, the opening in the docking plate 10, the opening having a diameter of 18mm, is used for inserting the bolt 11 into the locking docking plate 10 to form a closure for fixing the stud package 9 to the stud 1.

The package attachment means 8 is welded to the outside of the post package 9, the package attachment means 8 being ring-shaped or lug-shaped with an apertured package attachment aperture 25.

The connecting piece 7 is in a profiled bar structure and is not limited to be in a water drop shape or an oval shape, two ends of the connecting piece in the horizontal direction are respectively provided with an open hole, a large connecting piece open hole 14 and a small connecting piece open hole 15 are arranged at two ends of the connecting piece in the horizontal direction, the large connecting piece open hole 14 is aligned with a pre-assembly connecting open hole 25 on the pre-assembly connecting 8, and the nylon rod 2 is inserted to realize connection.

The connecting piece 7 of this application, engineering plastics panel is made, and is thick 20mm, designs the big trompil of connecting piece 14 and the little trompil 15 of connecting piece, wherein connects trompil 25 through the big trompil of connecting piece 14 and the pre-package on 8 and aligns, alternates nylon rod 2 and realizes connecting.

The small connecting piece opening 15 is combined and aligned with the female connecting buckle opening 16 and the male connecting buckle opening 22 and then used for serially connecting the bearings 3.

The connector links 5 are arranged alternately with the connectors 7 and the connectors 7 are arranged alternately with the package connecting means 8.

Although embodiments of the present invention have been shown and described, it will be appreciated by those skilled in the art that changes, modifications, substitutions and alterations can be made in these embodiments without departing from the principles and spirit of the invention, the scope of which is defined in the appended claims and their equivalents.