阅读说明：本技术 一种抛光剂、不锈钢件及其抛光处理方法 (Polishing agent, stainless steel part and polishing treatment method thereof ) 是由 刘国平 于 2017-07-03 设计创作，主要内容包括：一种抛光剂、不锈钢件及其抛光处理方法。抛光剂用于不锈钢件表面预处理,以200重量份计,包括如下重量份数的成分：10-50份双氧水,2-10份尿素,3-8份硼砂,6-20份冰醋酸,0.5-5份金刚石微粉,0.5-2份十二烷基苯磺酸钠和余量水。经过上述抛光剂处理后,不锈钢件表面清洁光亮,而且整个抛光处理方法工艺简单、环保,无气味无NO 2逸出,操作方便,使用成本低。(A polishing agent, a stainless steel member and a polishing treatment method thereof. The polishing agent is used for surface pretreatment of stainless steel parts and comprises the following components in parts by weight in 200 parts by weight: 10-50 parts of hydrogen peroxide, 2-10 parts of urea, 3-8 parts of borax, 6-20 parts of glacial acetic acid, 0.5-5 parts of diamond micropowder, 0.5-2 parts of sodium dodecyl benzene sulfonate and the balance of water. After the polishing agent is used for treating, the surface of the stainless steel part is clean and bright, and the whole polishing treatment method is simple in process, environment-friendly, odorless, free of NO 2 escaping, convenient to operate and low in use cost.)