阅读说明：本技术 一种空气净化器的集电极 (Collecting electrode of air purifier ) 是由 陈际军 汪孟金 邹海能 魏嘉宏 于 2019-10-24 设计创作，主要内容包括：一种空气净化器的集电极,该集电极采用了活塞式双层设计,内层集电极能沿外层集电极上下滑动,内层集电极还可以向下拉出,方便清洗或更换,使吸附在集电极上的尘埃能得及时清洁和处理,避免了累积后的尘埃脱落碰碎后又被吸回的缺陷,有利空气净化。(The utility model provides an air purifier's collecting electrode, this collecting electrode has adopted the double-deck design of piston, and inlayer collecting electrode can slide from top to bottom along outer collecting electrode, and inlayer collecting electrode can also pull out downwards, and convenient washing or change make the dust that adsorbs on the collecting electrode can in time be clean and handle, has avoided the dust after the accumulation to drop to bump the defect of being inhaled back again after garrulous, favourable air purification.)

1. The utility model provides an air purifier's collecting electrode, characterized by: the collector of the air purifier adopts a piston type double-layer design, and is arranged as an outer layer and an inner layer; the air purifier box body is used as an outer collector layer, the shape of an inner layer of the collector is the same as that of the outer collector layer, the length of the inner layer of the collector is the same as that of the outer collector layer, the outer diameter of the inner layer is smaller than that of the inner diameter of the outer layer, the inner layer is sleeved in the outer layer, the outer wall of the inner layer is tightly attached to the inner wall of the outer layer, the inner layer of the collector can slide up and down along the inner wall of the outer collector layer, the bottom of the inner layer of the collector is movably connected with a handle, the handle can be turned upwards from the outer side, a buckle is arranged on the outer side of the box body, the handle can be matched and locked with the buckle after being turned upwards, the whole inner layer is fixed; the top of the box body is provided with an air outlet for exhausting air outwards, the bottom of the box body is provided with an air inlet for sucking air inwards, and the center of the box body is provided with a shooting electrode.

2. The collector electrode of an air cleaner as claimed in claim 1, wherein: when the air purifier works, the emitter electrode discharges to the collector electrode, an electric field is formed between the emitter electrode and the collector electrode, when airflow passes through the electric field, dust wrapped in the airflow is adsorbed by the collector electrode, when the dust adsorbed by the collector electrode is accumulated to a certain thickness, the adsorption force of the collector electrode is reduced, the inner layer of the collector electrode needs to be cleaned, the handle of the inner layer is opened during cleaning, the inner layer can be pulled downwards to be cleaned, and the cleaning can be carried out again after the cleaning is finished, the adsorption force of the collector electrode can be restored, dust escape can be prevented, and secondary pollution caused by the fact that the dust accumulated on the collector electrode falls off after the purifier works for a long time can be avoided.

Technical Field

The invention relates to an air purification device, in particular to a collector of a low-temperature plasma air purification machine.

Background

Common low temperature plasma gas purification device, its collecting electrode is pinion rack or tooth bucket formula, remove dust and utilize static adsorption on the inner wall of collecting electrode, however, clarifier operating time is one long, the accumulation of dust that gathers on the inner wall of collecting electrode can increase, behind the dust accumulation, easily drop, do not have proper processing method again when droing, cause secondary pollution, then again, the dust that drops becomes the tiny particle through the collision, again by inhaling plasma treatment area, can be circulated many times like this, not only increased plasma's burden, and the gas treatment effect of serious influence plasma.

Disclosure of Invention

In order to overcome the problems, the invention provides the collector electrode of the air purifier, the collector electrode adopts a piston type double-layer design, the inner layer collector electrode can slide up and down along the outer layer collector electrode, and the inner layer collector electrode can also be pulled out downwards, so that the cleaning or the replacement is convenient, and the dust adsorbed on the inner wall of the collector electrode can be cleaned and treated in time.

The technical measure for solving the technical problem is that the collector of the air purifier is arranged into an outer layer and an inner layer. The collector adopts a piston type double-layer design, the box body of the air purifier is used as the outer layer of the collector, the top of the box body is provided with an air outlet for exhausting air outwards, the bottom of the box body is provided with an air inlet for sucking air inwards, and the center of the box body is provided with a jet electrode; the inlayer shape of collecting electrode is the same with outer, the length of the inlayer of collecting electrode is the same with outer length, and the outer wall of collecting electrode inlayer is hugged closely the outer inner wall of collecting electrode, the inlayer of collecting electrode can slide from top to bottom along the outer inner wall of collecting electrode, the bottom swing joint handle of the inlayer of collecting electrode, the handle can be followed the outside and turned up, the outside of box sets up the hasp, the handle turns up the back can with hasp cooperation locking, makes whole inlayer fix on outer inner wall, inlayer accessible handle pulls out downwards.

When the air purifier works, the emitter electrode discharges to the collector electrode, an electric field is formed between the emitter electrode and the collector electrode, when airflow passes through the electric field, dust wrapped in the airflow is adsorbed by the collector electrode, when the dust adsorbed by the collector electrode is accumulated to a certain thickness, the adsorption force of the collector electrode is reduced, the inner layer of the collector electrode needs to be cleaned, the handle of the inner layer is opened during cleaning, the inner layer can be pulled downwards to be cleaned, and the cleaning can be carried out again after the cleaning is finished, the adsorption force of the collector electrode can be restored, dust escape can be prevented, and secondary pollution caused by the fact that the dust accumulated on the collector electrode falls off after the purifier works for a long time can be avoided. Thereby improving the gas treatment effect of the purifier.

The invention has the advantages of convenient cleaning, secondary pollution prevention and reasonable structure.

Drawings

The invention is further described below with reference to the accompanying drawings.

Fig. 1 is a schematic view of a collector electrode of an air purifier.

In the figure, the device comprises an outer layer 1, an inner layer 2, an inner layer 3, a box body 4, a handle 5, a hasp 6, an air outlet 7, an air inlet 8 and an emitting electrode.

Detailed Description

In fig. 1, the collector of the air purifier is set to 1 and an inner layer 2; the air purifier box body 3 is used as a collector outer layer 1, the shape of an inner layer of the collector is the same as that of the collector outer layer, the outer warp of the inner layer is smaller than that of the outer layer, the length of the inner layer of the collector is the same as that of the outer layer, the inner layer is sleeved in the outer layer, the outer wall of the inner layer is tightly attached to the inner wall of the outer layer, the inner layer of the collector can slide up and down along the inner wall of the collector outer layer, the bottom of the inner layer of the collector is movably connected with a handle 4, the handle can be turned upwards from the outer side, a hasp 5 is arranged on the outer side of the box body, the handle can be matched and locked with the hasp after being turned upwards, the whole inner layer is fixed on the inner wall of; the top of the box body 3 is provided with an air outlet 6 for exhausting air outwards, the bottom of the box body is provided with an air inlet 7 for sucking air inwards, and the center of the box body is provided with a shooting electrode 8.