阅读说明：本技术 洗衣机及应用于该洗衣机的紧固件 (Washing machine and fastener applied to same ) 是由 乌尔·斯雷登斯克 罗比·博古维克 于 2020-04-17 设计创作，主要内容包括：一种洗衣机(100),包括机箱(2)、洗衣筒(4)、滚筒(5)、挂钩(6)、减震器(7)和紧固件(1)。洗衣筒(4)设置在机箱(2)内并与机箱(2)连接。滚筒(5)位于洗衣筒(4)内以接收待清洗的衣物,并被配置为相对于洗衣筒(4)旋转。挂钩(6)的第一端与洗衣筒(4)连接,挂钩(6)的第二端与机箱(2)内侧壁的上部连接。减震器(7)的第一端与洗衣筒(4)连接,减震器(7)的第二端与机箱(2)内侧壁的下部连接,以传递并减弱洗衣机(100)运作过程中由滚筒(5)产生的力。紧固件(1)被配置为将减震器(7)的第一端与洗衣筒(4)连接,包括主体部分(15)、第一端(13)、第二端(12)和至少一个突起(19)。主体部分(15)为圆柱状。第一端(13)为直径大于主体部分(15)的圆柱状。第二端(12)为沿着远离主体部分(15)的方向直径渐缩的圆锥状。至少一个突起(19)位于第二端(12)的至少部分圆周上,能够防止工人在安装涂抹润滑剂的紧固件(1)时,如果未将紧固件(1)在橡胶套(9)中压入足够的深度而导致紧固件(1)从橡胶套(9)中滑出,甚至掉落。(A washing machine (100) comprises a machine box (2), a washing drum (4), a roller (5), a hook (6), a shock absorber (7) and a fastener (1). The washing cylinder (4) is arranged in the machine box (2) and is connected with the machine box (2). The drum (5) is located within the washing drum (4) to receive laundry to be washed and is configured to rotate relative to the washing drum (4). The first end of the hook (6) is connected with the washing cylinder (4), and the second end of the hook (6) is connected with the upper part of the inner side wall of the machine case (2). The first end of the damper (7) is connected with the washing drum (4), and the second end of the damper (7) is connected with the lower part of the inner side wall of the cabinet (2) to transmit and weaken the force generated by the drum (5) in the operation process of the washing machine (100). The fastener (1) is configured to connect a first end of the damper (7) with the washing tub (4), and comprises a main body portion (15), a first end (13), a second end (12), and at least one protrusion (19). The body portion (15) is cylindrical. The first end (13) is cylindrical with a diameter greater than the body portion (15). The second end (12) is conical with a diameter tapering in a direction away from the body portion (15). The at least one protrusion (19) is located on at least a portion of the circumference of the second end (12) to prevent a worker from installing the lubricated fastener (1) if the fastener (1) is not pressed into the rubber sleeve (9) to a sufficient depth to cause the fastener (1) to slip out of the rubber sleeve (9) or even fall out.)