阅读说明：本技术 一种高炉本体石墨安全墙砌筑施工方法 (Construction method for building graphite safety wall of blast furnace body ) 是由 唐剑 刘辉 曾志华 樊文礼 张洪中 刘�东 于 2021-08-30 设计创作，主要内容包括：本申请公开了一种高炉本体石墨安全墙砌筑施工方法,包括以下步骤：步骤一、确认石墨砖和砌筑泥浆合格。步骤二、将冷却壁的表面和石墨砖的表面清理干净,并使得石墨砖上构成石墨安全墙底部的表面的平整度符合要求。步骤三、对石墨砖进行预摆,并对石墨砖上面向冷却壁的表面是否具有不符合要求的区域进行检查,若是,则对区域进行打磨,然后重复本步骤,直至石墨砖上面向冷却壁的表面的各处均符合要求。步骤四、在石墨砖的砌筑面涂抹砌筑泥浆,然后进行砌筑并找正。步骤五、重复上述步骤二至四,直至得到石墨安全墙。本申请为石墨安全墙施工提供依据,使得在施工石墨安全墙的过程中更加规范,进一步确保施工质量。(The application discloses a construction method for building a graphite safety wall of a blast furnace body, which comprises the following steps: step one, confirming that the graphite brick and the masonry slurry are qualified. And step two, cleaning the surface of the cooling wall and the surface of the graphite brick, and enabling the flatness of the surface of the graphite brick forming the bottom of the graphite safety wall to meet the requirement. And step three, pre-swinging the graphite brick, checking whether the surface, facing the cooling wall, of the graphite brick has an area which does not meet the requirement, if so, polishing the area, and repeating the step until all parts, facing the surface of the cooling wall, of the graphite brick meet the requirement. And step four, coating masonry slurry on the masonry surface of the graphite brick, and then performing masonry and alignment. And step five, repeating the step two to the step four until the graphite safety wall is obtained. This application provides the basis for the construction of graphite safety wall for at the in-process of construction graphite safety wall more standard, further ensure construction quality.)