阅读说明：本技术 用于具有穿孔火焰稳定器的燃烧器的控制系统 (Control system for a burner with perforated flame holder ) 是由 道格拉斯·W·卡尔科夫 唐纳德·肯德里克 詹姆士·K·丹西 罗伯特·盖革 杰克逊·M·普雷斯 于 2019-01-16 设计创作，主要内容包括：本申请公开了用于具有穿孔火焰稳定器的燃烧器的控制系统。燃烧系统包括穿孔火焰稳定器、预热燃料分配器、主燃料分配器、氧化剂源、传感器阵列、和控制器。氧化剂源输出氧化剂。预热燃料分配器支持预热火焰,该预热火焰被配置成当燃烧系统处于预热状态时通过输出预热燃料来预热穿孔火焰稳定器。主燃料源在标准操作状态下输出主燃料。穿孔火焰稳定器被配置成在标准操作状态下支持主燃料和氧化剂的燃烧反应。传感器被配置成感测预热火焰和穿孔火焰稳定器的参数,并向控制器输出传感器信号。控制器执行软件指令,包括响应于传感器信号调节主燃料、预热燃料、和氧化剂的流。(A control system for a burner having a perforated flame holder is disclosed. The combustion system includes a perforated flame holder, a preheat fuel distributor, a main fuel distributor, an oxidant source, a sensor array, and a controller. The oxidant source outputs an oxidant. The preheat fuel distributor supports a preheat flame configured to preheat the perforated flame holder by outputting preheat fuel when the combustion system is in a preheat state. The main fuel source outputs the main fuel under normal operating conditions. The perforated flame holder is configured to support a combustion reaction of a primary fuel and an oxidant under standard operating conditions. The sensor is configured to sense parameters of the pre-heat flame and the perforated flame holder and output a sensor signal to the controller. The controller executes software instructions including adjusting the flow of the main fuel, the preheat fuel, and the oxidant in response to the sensor signals.)